FXO FXS Analog Gateway - UCM200-D2S2O
Basic Information
- Feature Packed : A complete features set that meets all of your requirements and lowers communication costs.
- User-Friendly : Easy to use Web GUI and intuitive control. Effortless intallations, configure, debug and maintain.
- Elevated Efficiency : Excellent voice compression using established codecs for the industry. Compatible with various IP systems
- Adaptive Setting : XNTEL PBX supports standard open protocol TR-069 and PPPoE or DHCP provisioning.
Aegis XNTEL FXS-FXO VoIP Gateway
XNTEL's 2 ports analog FXS/FXO gateway provides a cost-effective and straightforward means of assisting traditional telephone, fax, and PBX systems to link with IP networks. This allows call centers and multi-branch businesses to handle robust, versatile, and effective VoIP solutions at a significantly reduced cost. When connected to a PBX, LAN, or WAN, the four-port analog FXS/FXO VoIP Gateway transforms analog PSTN messages into a format that can be sent over conventional IP networks.
The 4 Ports Analog VoIP Gateway UCM200-D2S2O is intended for voicemail and unified messaging applications. It can be used to connect vintage PBX to a local area network (10/100/1000M optional) via a Base-T Ethernet connection. The analog loop start functionality facilitates serial protocols, in-band signaling (DTMF or FSK), and T.38 for fax over IP (FoIP) transmissions.
1. | Completely non-blocking architecture and Scalable System |
2. | Easy integration with existing telephony interfaces |
3. | Open-standard SIP support and register to multiple SIP proxy servers |
4. | Make and receive IP calls from analog extensions |
5. | Call budgeting based on allocated amount, minutes and call count |
6. | Manageable based call routing TDP-IP/IP-TDM |
7. | Restrict unwanted calls with list of denied numbers |
8. | Real-time call record send to CDR server |
9. | Caller ID presentation and restriction |
10. | Hotline extension setting |
11. | Web-based remote administration |
12. | Consol access via Telnet, SSH. |
Technical Specifications
Physical Interface | ||
Phone Interface: 4 Ports FXS/FXO, RJ-11(some models are RJ21 available) | ||
Ethernet Interface: 2* RJ-45 10/100Mbps Base-T Ethernet, Female RJ-45 | ||
1000M LAN/WAN available for some product models while required | ||
Session Capacity | 4 SIP channels (UCM200-D2S2O) | |
2 FXS/ FXO channels (UCM200-D2S2O) | ||
Connectivity | Supported Dial Mode: DTMF and Pulse | |
Pulse: 10 and 20PPS | ||
Caller ID:DTMF/FSK | ||
Max Cable Length:5KM | ||
Reversed Polarity | ||
Open VPN | ||
VoIP Protocols | TLS / SRTP ;OpenVpn;SIP V2.0 (RFC 3261,3262,3264);IMS/3GPP; SDP ;REFER (RFC 3515);RTP/RTCP;STUN (RFC3489) ;ARP/RARP (RFC 826/903);SNTP (RFC 2030);DHCP/PPPoE;TFTP/HTTP/HTTPS;DNS/DNSSRV (RFC 1706/RFC2782);VLAN802. 1P/802.1Q | |
Call & Routing | T.38/Pass-through, up to 14.4kbpsPort Groups | |
IP Trunks | ||
Primary and Secondary SIP Account | ||
4 Inbound/Outbound Routing | ||
Number Manipulation | ||
Digit maps | ||
TDM to IP or IP to TDM | ||
IP load balancing | ||
IP fault tolerance | ||
Voice Capability | G.711A/U law, G.723.1, G.729A/B,G.726,iLBC,AMRG.711A/U law, G.723.1, G.729A/B,G.726,iLBC,AMR | |
Comfort Noise Generation(CNG) | ||
Echo Cancellation(G.168) | ||
DTMF mode: Signal/RFC2833/INBAND | ||
Silence suppression with comfort noise | ||
G.168 automatic echo cancellation | ||
Call Progress Analysis (CPA), including Positive Voice Detection, Positive Answering | ||
Machine Detection (PAMD), DTMF detection, and fax tone detection | ||
Manageable based call routing TDP-IP/IP-TDM. | ||
Restrict unwanted calls with list of denied numbers. | ||
Voice Activity Detection (VAD) | ||
Adaptive (Dynamic) Jitter Buffer | ||
Programmable Gain Control | ||
Hook Flash | ||
Network Capability | Static IP, PPPoE, DHCP Client | |
IPv4, IPv6 | ||
Static/dynamic ARP | ||
DIFFServ, ToS | ||
NAT (Rout and Bridge)+ | ||
MAC Address Clone | ||
Static routing+ | ||
Built-in Firewalls | ||
QoS, Traffic Shaping | ||
Voice/Data/Management Vlan | ||
Maintenance & Upgrading | SNMP/TR069. | |
Auto Provision | ||
Action URL | ||
Digit map | ||
Web/Telnet. ACL | ||
Configuration Backup/Restore | ||
Bandwidth Optimization | ||
Routing Rules based Prefixes | ||
Firmware Upgrade via WEB | ||
Syslog and CDR. | ||
Access Rule list. | ||
Network Capture | ||
Outward Test(GR909). | ||
Automatic Time Synchronization | ||
IVR local Maintenance. | ||
Cloud-based Management | ||
Caller/Called Number Manipulation | ||
Open-standard SIP support and register to multiple SIP proxy servers. | ||
Application Capabilities | SupportedDial Mode: DTMF and PulseCall waiting | |
Blind Transfer | ||
Attend Transfer | ||
Call forward on Busy | ||
Call forward on No Reply | ||
Unconditional Call Forward | ||
HotlineCall hold | ||
DND | ||
Call Pickup | ||
3-way conference | ||
Voicemail | ||
Conferencing Resource | Call budgeting based on allocated amount, minutes and call count | |
Complete non-blocking architecture and Scalable System | ||
Hotline extension setting | ||
Support 3-Way and Multi-Way Conferencing | ||
Environment & Power | Power Supply: 100-240V, 50-60Hz+ | |
Power Consumption: Approximately 50W | ||
(Storage): -20 ~85°C | ||
Humidity: 10%-90% No condensation. | ||
Operating temperature range: -10 ℃ ~ 55 ℃ | ||
Physical Dimension | L*W*H 140(mm)*100(mm)*30(mm) | |
Weight Approximately 0.44ibs(about 0.2kg) | ||
Warranty/Certifications | 3 years: The first year exchange for free. On the Second & Third free to repair. CE, FCC or Any other Certificates Customizable Broadsoft, Elastix, Asterisk, Teams and other UC platform |